Info
NORMAL INDUSTRIAL PAINT SYSTEMS HAVE HIGH CARBON EMISSIONS
COMMERCIALLY COMPANIES WILL BE PENALISED BY TIGHTER REGULATIONS AND TAXES
CONSIDER
(1) 'COMPLIANT' PAINTS I.E. HIGH SOLIDS LESS SOLVENT OR HITIX ONE COAT SYSTEM.
EMISSIONS CUT BY 25%.
(2) SOLVENT BASED PRIMER, MORE FORGIVING OF UNCLEAN SURFACES FOLLOWED BY WATERBASED TOP COATS.
FALLACY - WATERBASED PAINTS DO NOT WASH OFF IN WATER WHEN DRY, MOST MEET A VERY HIGH SPECIFICATION
EMISSIONS CUT BY 50 - 75 %.
(3) WATERBASED PRIMER AND WATER BASED TOP COAT MEET A VERY HIGH SPECIFICATION BUT REQUIRE GOOD PRE-TREATMENT OUR ECO-CLEAN PANEL WIPE IS RECOMMENDED.
EMISSIONS CUT UP TO 95 %
OUR POWDER COATINGS ARE GREEN COMPARED WITH SOLVENT BASED PAINTS BUT YOU CAN STILL SAVE ENERGY BY CURING AT LOWER TEMPERATURES INSTEAD OF 180 - 200'C USE OUR LOW CURE 160'C POWDER RANGE AND SAVE UP TO 50% ON FUEL BILLS
CUT EMISSIONS FURTHER, AND REDUCE YOUR 'CARBON FOOTPRINT'
FACT - WATERBASED PAINTS CAN AIR DRY WITHIN 15 MINS TO 2 HRS DEPENDING ON GRADE, ESPECIALLY WHEN SUBJECTED TO AIR FLOW / WARM ENVIRONMENT.
RING OUR TECHNICAL DEPARTMENT FOR ASSESSMENT.
THOMAS HOWSE PAINTS LIMITED
EMAIL: sales@howsepaints.co.uk TEL: 0121 559 1451
|
